Estimating & bid management for general, trade and specialty contractors

Estimation Engine with AI Built-In for General, Trade and Specialty Contractors

Every material, labor hour and finish, priced scope by scope, down to the last line item. Revisions, alternates and the proposal live in the same estimate.

  • Build your own estimating tools
  • Up to 10 customized material libraries
  • Team review and approvals
  • Company Brain, powered by ScopeDive AI

Your Cost Buckets Your Cost Components Your Cost Structure

One estimation engine for every cost you carry, with AI that works for you, not instead of you.

In one place

  • Your rates
  • Your library
  • Scopes & takeoff
  • Alternates
  • Revisions
  • Proposals
  • Bid history

ScopeDive AI

  • drafts scopes
  • drafts RFIs
  • flags what needs a look

You review and decide. The pricing stays yours.

Reported by contractors testing ScopeDive
30–50%

less estimating time per bid. Fabricators running real bids in ScopeDive during testing report saving 30 to 50 percent of their estimating time. More bids out the door means more chances to win.

Based on what our testing contractors reported, 2026. Your results depend on your work.
Compare ScopeDive with Excel

Less time per estimate

Your buckets, components and libraries price the scope for you.

More bids out the door

The hours you get back go into the next bid.

More chances to win

More bids on the board, priced the same way every time.

Build a bid in minutes

From new project to proposal in five steps.

Start a project, add and price scope by scope, review every number, and send a clean proposal.

See all features

Name it, pick the client and the bid date.Add each scope and set how it’s priced: risers, LF, LB, each or SF.Take it off line by line from your library; the hours you type are multiplied by your rates.Review with the team: every changed scope, before and after.Turn the estimate into a client proposal and export the PDF.

ScopeDive New project form: project name and number, client, address, bid due date, estimator and project manager
ScopeDive scope setup: the pricing basis list open (per linear foot, per square foot, per pound, per each, risers, flights, landings and more), takeoff quantity, drawing references, division and section, and scope notes
ScopeDive takeoff grid for a stair: stringers, pans, nosings, landing plate, concrete fill, posts, base plates, anchors and grout, each line priced from the material library
ScopeDive team review: a review round listing each changed scope with its value before and after and what changed, above the project’s scope list
ScopeDive proposal: the company letterhead and logo, the project and customer, and the first base-bid scopes

What you get

Everything a custom shop prices, in one place.

Estimate

Every cost of the project, in one organized view.

ScopeDive lays out every cost of a project in one place, scope by scope: material, fabrication, paint, erection, transportation, subcontractors — you name it, and whatever else your business needs.

  • Every cost bucket on one screen
  • Markup, bonds and sales tax
  • Scope notes, qualifications and exclusions
  • Revision management and bid cost grouping
  • Paste a takeoff straight from Excel, and undo any slip
  • Competing reviews: each reviewer prices a private copy, you keep only what you accept
Learn more about the estimating engine
ScopeDive estimate tab: final project bid, direct cost, markup, alternates, a cost chart, the project cost buckets and the scope table

Material library ↔ estimate

Your library feeds every estimate.

Shapes, plate, glass, wood, hardware and finishes, with your own costs, weights and suppliers. Change a price once and see every open bid it touches.

  • Your costs, your weights, your suppliers
  • Where every item is used, across every project and scope
  • Update one row, one project or the whole library
  • Metric and imperial, side by side
Learn more about the material library
ScopeDive material library: the company’s own libraries as tabs, and the materials in use with code, category, shape, grade, vendor, unit, weight, cost, where each is used (projects, scopes, lines) and total quantity used

ScopeDive AI

AI that drafts, not decides.

ScopeDive AI reads specs and drawing sets, drafts your scopes with the page each one came from, drafts RFIs and flags concerns. Every draft lands in the same scopes you would fill by hand, so you can keep going manually anytime. It never prices.

  • Learns what’s normal for your shop from your own submitted bids
  • A common-sense check on every scope’s cost per unit, before it ships
  • Onboarding in days: your history comes with you
  • Your data trains only your company's brain, never shared
Learn more about ScopeDive AI
Learned from 212 submitted bidsUpdated today
Scope typeSize bandBidsConfidence
Egress stair40–80 risers18High
Guardrail, galvanized50–150 LF31High
Lintels & loose angles5k–10k LB24High
Bollards10–25 EA12Medium
Roof dunnage5k–15k LB9Medium
Common-sense check · flags only, never changes a number
Guardrail · 113 LF
~40% aboveLooks high
Lintels · 7,717 LB
usualIn range
Bollards · 21 EA
usualIn range
  • Misc metals
  • Ornamental railings
  • Glass & glazing
  • Handrail
  • Stairs
  • Architectural millwork
  • Curtain wall
  • Storefront
  • Canopies
  • Custom fabrication
“In custom fabrication, we don't say no. We always find a way. That's what to expect from ScopeDive.”
— MG Tarboush, Founder
See how each trade sets up ScopeDive

Bid management

Every bid invite in one inbox, one click from a project.

Upload an invite, fill in the details, assign an estimator and mark it bidding. Merge duplicates, then create the project with every general contractor as a bid recipient. Sort by due date, value, client or status, and see what's due this week at a glance.

  • Upload an invite and fill in the details
  • Assign an estimator and mark it bidding
  • Merge duplicate invites
  • Create the project with all GCs as bid recipients
  • Track addenda and changes
Learn more about the Bid Inbox
ScopeDive Bid Inbox: bid invitations, newest first, each with its project, the general contractors that sent it, location, bid due date, assigned estimator, bidding decision (bidding or maybe) and status (new or awaiting review)

Revisions & proposals

Change the bid without losing the old one.

Every change becomes a revision, side by side with the last. Price alternates without touching the base bid, group costs the way the client wants to see them, and send a clean proposal.

  • Rev 1, Rev 2 … compared side by side
  • Affected items highlighted in every scope, with % change
  • Revision locking and estimate documentation
Learn more about revisions and proposals
ScopeDive compare revisions: project totals for two revisions side by side (base bid, final bid, direct cost and every cost bucket, alternates) with the change and the % change

Team & approvals

Tasks, conversations and approvals, inside the estimate.

Assign a task on any scope, talk in one thread per project, and send bids above your limit to one approver who approves, asks for changes or rejects with a note.

Learn more about team and tasks
ApprovalRiverside Campus Renovation · Rev 2
Waiting onEstimating LeadDue today, 4:00 PM

“Addendum 2 landings added and the lobby breakout priced as Alt 1. Please approve before it goes to Summit Point Builders.”

Rev 2 proposal.pdfAddendum 2 markup.pdf
ApproveAsk for changesReject
Conversation

@Estimating Lead the discount is on the review tab — adders look right.

For estimators who build systems

The Engine Room

The Engine Room is where Estimation Structure and Library settings live: how a bid rolls up, how costs are bucketed, how materials are modeled. Everything in ScopeDive is configurable. This is how the machine is put together.

Learn more about the Engine Room
  • StarterThe Engine Room switches: turn cost components on or off, change unit rates and use the existing component adjustments.
  • ProThe full Engine Room is included: add and edit your own cost components.
  • EnterpriseThe full Engine Room, with free onboarding of your own setup.
Per scope
Takeoff lineunit · qty · rate
Cost componentmaterial · labor · paint · …
Cost bucketyour names, your mapping
Scope totaldirect cost + markup
Per project
Direct costall active scopes
Markup & profitper scope or project
Adders / discountsbond · insurance · …
Sales taxby tax basis
Final bidbase bid

Alternates (add / deduct) are priced as their own scopes and listed beside the base bid, never inside it.

ScopeDive Engine Room, cost components: how each number is entered (typed by the estimator or from the library), its measure, its calculation (time × rate, days × rate, quantity × rate), default rate and cost bucket

01 · Estimation structure

project → scopes → takeoff lines → cost components → buckets → direct cost

  • Scopes are Base, Alt Add or Alt Deduct
  • Cost components map to your own cost buckets in Cost Structure
  • Markup follows the project or is set per scope

02 · Cost structure

unit · qty · rate · minimum

  • Every line keeps its own unit: lb, LF, SF, EA, hours, trips
  • Hours, days and trips are typed by the estimator and multiplied by your rates
  • Minimum charge: none, each line, the scope total, or both
  • Rates come from the library, from an attribute, or are typed; inherited vs typed is shown on the line

03 · Setup profiles

attributes · components · takeoff columns

  • A profile defines what a scope carries: its attributes, its cost components and its takeoff grid columns
  • Example: Generic Estimating Starter · 3 attributes · 3 components · 11 columns

04 · Library model

material → shape · size · grade → weight · unit · cost

  • Where-used: every project, scope and line a material appears in
  • Working projects follow library prices; a rate you typed never moves
  • Submitted projects keep their prices and are told what changed
  • Override on one project, or change the library default

05 · Adders & tax engine

fixed | % of base → category → rollup

  • Methods: fixed amount, % of direct cost, material, labor, equipment, subcontractors, scope total or project bid, quantity × unit cost, manual
  • Categories: bond, insurance, permit, freight, general conditions, contingency, escalation, discount
  • Bonds: flat %, tiered %, fixed or manual
  • Sales tax basis: included, excluded, exempt, taxable material only, taxable equipment only

06 · Revision model

REV00 (base, locked) → REV01 → REV02 …

  • Each revision is a snapshot of the whole project estimate
  • Compare any two: totals, buckets and scopes, with the change and the % change
  • Alternates price add and deduct separately from the base bid

Plans

Plans for every size of team.

Three plans: Starter, Pro and Enterprise. Pick the one that fits how your shop estimates.

Starter

Estimating, proposals and your bid inbox.

Pricing fitted to your shop’s size

2 users included

  • Estimating, proposals, projects, clients & libraries
  • Bid inbox
  • Bid history
  • Email notifications
  • 2 material libraries, built with your own materials and rates
  • Engine Room switches: turn cost components on or off, change unit rates, use the existing component adjustments
  • 100 GB file storage

No ScopeDive AI. Adding or editing cost components is not included.

14-day free trial. No credit card.

Book a tour

Pro

Includes ScopeDive AI

ScopeDive AI, the Engine Room, approvals and team workflow.

Pricing fitted to your shop’s size

4 users included (4-user minimum)

  • Everything in Starter
  • Approvals
  • AI scope drafting
  • Company brain
  • Engine Room, included
  • RFI management
  • Conversations
  • Tasks
  • 5 material libraries
  • 500 ScopeDive AI credits / month
  • Read-only viewer seats available
  • Optional paid onboarding
  • 500 GB file storage

Trial needs a card. No charge during the trial; cancel anytime within it.

Book a tour

Enterprise

Everything in Pro for larger teams, with free onboarding.

Pricing fitted to your shop’s size

10 users + 2 read-only viewers included · for teams of 10+

  • Everything in Pro
  • AI onboarding Coming soon
  • 10 material libraries
  • 2,500 ScopeDive AI credits / month
  • Free onboarding
  • 2 TB file storage
Book a tour

Pay yearly and get 2 months free.

Need more? Add storage in +500 GB packs for $25/month.

See pricing and plan questions

Questions about a plan or your team size? Email hello@scopedive.com.

Questions

Frequently asked questions

ScopeDive is estimation and bid management software built for construction trade contractors. You build estimates scope by scope, price every line from your own library, manage bids, revisions and proposals. ScopeDive AI drafts scopes from the specs, each with its source page; you review and decide, and it never prices.

ScopeDive is built for general contractors, trade contractors and specialty contractors. Each company builds its own cost buckets, cost components and material libraries, so it fits the way your trade prices work: framing, MEP, structural steel, misc. metals, millwork, signs, concrete, landscape, stone and more. It is especially strong where no two jobs are alike and every bid needs its own materials, units and pricing. See trades, or ask us.

Yes. The material library holds your own costs, weights and suppliers, and it feeds every estimate. Change a price once and see every open bid it touches. Libraries are included in every plan: 2 on Starter, 5 on Pro and 10 on Enterprise.

The Engine Room is where Estimation Structure and Library settings live. Starter gets the Engine Room switches: turn cost components on or off, change unit rates and use the existing component adjustments (adding or editing cost components is not included). Pro and Enterprise include the full Engine Room.

Every trial is reviewed and approved by ScopeDive. The Starter trial is free for 14 days and needs no credit card. A Pro trial needs a card, but nothing is charged during the trial and you can cancel anytime within it. Get started and we’ll set your shop up personally.

Both. Each company picks its units in Settings, and the whole system follows: takeoffs, estimates, the material library and proposals. You can switch anytime, and the library keeps metric and imperial values side by side.

Your data trains only your company’s brain, never anyone else’s, and it is never shared.

Sign-in supports two-step login and passkeys, and your company can require two-step login for everyone. Roles and bid limits decide who can change or submit a price, and every change is recorded in an audit trail you can export.

Starter includes 2 users, Pro includes 4, and Enterprise includes 10 users plus 2 read-only viewers. Extra seats can be added on any plan. Teams of 10 or more should look at Enterprise.

Starter includes 100 GB of file storage, Pro 500 GB and Enterprise 2 TB. Need more? Add storage in +500 GB packs for $25/month.

Enterprise is for teams of 10+ users. It includes everything in Pro, with 10 users and 2 read-only viewers, 10 material libraries, 2,500 ScopeDive AI credits a month, 2 TB of file storage and free onboarding of your own library and estimation structure.

Book a 20-minute tour, or fill in the short form on the Get started page. A person replies within 2 business days and sets you up personally.

See all questions in the FAQ

Mohammed G. Tarboush, founder of ScopeDive
“For twenty-five years I've estimated and managed custom fabrication work — steel, aluminum, brass, glass, wood and complete fit-outs, each with its own finishes and hardware. No two jobs were alike, and that taught me how many materials, units and changes go into a single bid, and how fast the numbers move when the drawings do. I built ScopeDive because the tools I tried were made for simple, repeatable work. Custom fabrication isn't simple, and it deserves software built by someone who has priced it.”
Mohammed G. Tarboush — Founder, ScopeDive Technologies LLC · 25 years managing custom fabrication operations · Boston, MA, USA

More about ScopeDive

The company

ScopeDive Technologies LLC

ScopeDive makes estimating and bid management software for general, trade and specialty contractors, with ScopeDive AI built in. ScopeDive AI drafts; you review and decide, and the pricing stays yours.

Company
ScopeDive Technologies LLC
Address
75 State Street, Suite 100
Boston, MA 02109, USA
Contact us
hello@scopedive.com
Join our team
jobs@scopedive.com

ScopeDive Consulting

Pricing every job across your whole company?

Twenty-five years of estimating and operations in custom fabrication, applied to your company: estimating workflow, labor standards, bid/no-bid discipline and the systems that hold them together.

Details coming soon

See it on your work

Price your next bid in ScopeDive.

Book a 20-minute tour and bring a bid you recently priced. We will show you how your library, your rates and your cost structure would look in ScopeDive.

ScopeDive company dashboard: active pipeline, bids due, total bid value, projects by status (lead, bidding, submitted, awarded, lost) and team workload

Join our newsletter

Product updates and estimating notes from the shop floor.

Opening soon