Estimating engine

Construction estimating software built on your own cost structure.

ScopeDive is an estimation engine with AI built-in. You define the cost buckets, the cost components and the rates. Every scope rolls up through them to a final bid you can explain line by line, and it all works by hand. ScopeDive AI drafts inside that same structure; the estimator decides.

ScopeDive scope page for a three-flight pan stair: direct cost, markup and final scope bid, the scope's cost buckets with a total and cost per riser each, a cost breakdown chart, the scope setup with drawing references, and scope notes with qualifications and exclusions

How a bid rolls up

From one takeoff line to the final bid, with nothing hidden.

Most estimating mistakes are not bad math. They are numbers nobody can trace: a rate pasted from an old job, a subtotal that skipped a row, a markup applied twice. ScopeDive fixes the path every number takes, so anyone on your team can follow it.

Inside a scope, each takeoff line carries a quantity and a rate. Lines feed cost components, components feed your cost buckets, and the buckets add up to the scope's direct cost. Markup follows the project or is set per scope.

Across the project, the direct cost of every active scope is added up, then markup and profit, then adders and discounts such as bonds and insurance, then sales tax by its tax basis. The result is the base bid.

The roll-up, in order
  1. Takeoff lineQuantity and rate, from your library or typed.
  2. Cost componentMaterial, shop labor, finish, field labor, freight and whatever else your shop carries.
  3. Cost bucketYour names, your mapping. Every bucket shows on the scope page.
  4. Scope totalDirect cost plus markup.
  5. Final bidAll active scopes, markup and profit, adders or discounts, then sales tax.

Alternates (add or deduct) are priced as their own scopes and listed beside the base bid, never inside it.

Cost buckets

Cost buckets that match how your shop thinks about cost.

A cost bucket is a heading you want to see a total for on every scope. In ScopeDive each company builds its own list in the Engine Room. Material is always a bucket; the rest is up to you. A fabrication shop might want Shop Fabrication, Finish and Field Erection side by side. A glazing contractor might split Glass, Framing and Installation. A millwork shop might care most about Shop Labor and Finishing.

Because the buckets are yours, the scope page reads the way you already review a number. Every bucket sits on one screen with its total and its cost per unit of the scope, so a figure that looks off stands out before the bid goes anywhere.

How to set up cost buckets for a fabrication shop
ScopeDive estimate tab for a whole project: final project bid, direct cost, markup and alternates at the top, a cost chart, the project's cost bucket totals and the table of scopes

Cost components

Cost components: where your math lives.

A cost component is one way a cost gets into a scope. Each component says how its number comes in (typed by the estimator, or from the library), what it measures, how it is calculated (time × rate, days × rate, quantity × rate, weight × rate), its default rate and which cost bucket it lands in. A company can have up to 100 active cost components.

This is the part that keeps estimates honest. ScopeDive does not come with someone else's production rates. Your Shop Fabrication component multiplies the hours your estimator types by your shop rate; your Field Erection component does the same with your field rate. Change a default rate in one place and every new estimate starts from it.

Rates come from the library, from an attribute of the scope, or are typed on the line, and the line shows which is which: inherited or typed. A minimum charge can apply to nothing, to each line, to the scope total, or to both.

ScopeDive Engine Room, cost components list: for each component, how the number comes in (typed or from the library), when it is entered, what it measures, its calculation such as time times rate or weight times rate, its default rate, its cost bucket and whether it is active

The Engine Room

The Engine Room: where your estimating system is built.

The Engine Room is where Estimation Structure and Library settings live: how a bid rolls up, how costs are bucketed and how materials are modeled. Changes made there reach every new estimate, so the whole team prices the same way.

  • Estimation structure

    Scopes, components, buckets

    Scopes are Base, Alt Add or Alt Deduct. Cost components map to your own cost buckets. Markup follows the project or is set per scope.

  • Setup profiles

    What a scope carries

    A profile defines what a scope carries: its attributes, its cost components and its takeoff grid columns. Set it up once and every estimator starts from the same fields.

  • Adders & tax

    Bonds, insurance, sales tax

    Adders and discounts as a fixed amount or a percentage of a base you choose; bonds as a flat or tiered percentage; sales tax by tax basis, including taxable material only.

Scopes and takeoff

Price scope by scope, down to the last washer.

A project is a list of scopes. Each scope has its own pricing basis, takeoff quantity, drawing references and description, and its own takeoff grid. Lines come from your material library or are typed. If your takeoff already lives in a spreadsheet, paste it straight from Excel, and undo any slip.

Scope groups carry a per-unit price for scopes that are priced together. Custom adjustments, adds or deducts, can go into any cost bucket when a scope needs something the standard lines do not cover. Notes, qualifications and exclusions sit on the scope, and the ones you choose can show on the proposal.

Alternates are numbered and priced as their own scopes: alternate add or alternate deduct, never inside the base bid. When the drawings move, you revise the whole bid and keep the old one.

Works fully by hand. AI drafts inside it.

Everything above works without AI. Many shops will run ScopeDive exactly that way. When you want help, ScopeDive AI reads the bid documents and drafts scopes, with the source words quoted, into the same structure. Each draft line is accepted, edited or rejected by the estimator. It never prices.

  • Every cost bucket on one screen
  • Markup, bonds and sales tax
  • Scope notes, qualifications and exclusions
  • Alternates beside the base bid, never inside it
  • Metric or imperial: each company picks, the whole system follows

See it on your work

Price your next bid in ScopeDive.

Book a 20-minute tour and bring a bid you recently priced. We will show you how your library, your rates and your cost structure would look in ScopeDive.