Guide

How to defend your number when the GC asks “why this price?”

The call comes after bid day: "You're high. Can you sharpen your pencil?" How to answer with the build-up instead of a discount, separate scope from price, and keep your margin when the number is right.

Guide · Updated November 9, 2026 · About 8 minutes

Every subcontractor knows the call. The GC has leveled the bids, yours is not the lowest, and they want to know why. Sometimes they are fishing for a discount. Sometimes they have genuinely found a difference in scope. Often it is both. How you answer decides whether you keep your margin, lose the job, or win it at a price you regret.

The estimators who handle this call well have one thing in common: they can show how the number was built, quickly and calmly, without opening five spreadsheets. This guide is about getting to that position.

First, find out what they are really asking

"Why this price?" can mean three different things, and each needs a different answer:

  • "Your scope is different from the others." During bid leveling the GC lines up every sub's bid. If you included something others excluded, you look high for a good reason.
  • "Your number on one item looks off." They have compared item by item and one of your scopes stands out.
  • "Everyone is high; we are over budget." This is a budget problem, not a pricing problem. Discounting will not fix it, but options might.

Ask before you answer: "Which items are you comparing?" and "What are the others including or excluding?" GCs will often tell you more than you expect, and the answer decides your next move.

Separate scope from price

Most "you're high" conversations are really scope conversations. Before you talk about price at all, confirm you are comparing the same work:

  • Did the other bidders include the same addenda? A bid priced on an older set may be lower simply because it is missing work.
  • Did they include shop drawings, engineering, field measure, freight, cranes, finish? These are the costs most often excluded quietly.
  • Did they carry alternates inside their base? An alternate priced into the base makes a bid look high; an alternate left out makes it look low.
  • Are their exclusions longer than yours?

This is where a clear proposal pays off. If your proposal lists the documents and addenda you priced, describes each scope in the GC's words, keeps alternates separate and ties qualifications and exclusions to specific scopes, the GC can see the differences themselves. Often the conversation ends there: "Ah, you included galvanizing and they didn't."

Never lower a price to match a bid that excludes work you included. Instead, offer to show the same exclusion so they can compare like with like, and let them decide whether they want that work in or out.

Show the build-up, not a feeling

When the scope matches and the question is the price itself, the strongest answer is the build-up: what goes into the number, by cost category. Not the full estimate (you do not need to hand over your rates), but enough to show the number is reasoned, not padded.

For a single scope, that usually means:

  • Material, and what drives it: the quantity, the weight, the spec.
  • Shop labor, and why: complexity, number of pieces, connections.
  • Finish, and what the spec requires.
  • Field labor, and the site conditions behind it: access, height, phasing.
  • Equipment and freight, and the reason: crane days, trips, distance.

This is why a consistent cost structure matters. If every scope in your estimate rolls up into the same cost buckets, you can say "of this stair's price, this share is material, this share is shop, this share is field, and here is why each is what it is" in two minutes. If the estimate is a one-off spreadsheet, you will need a day to reconstruct it, and by then the GC has moved on.

ScopeDive scope page for a pan stair: direct cost, markup and final scope bid, every cost bucket with its total and cost per riser, a cost breakdown chart, the scope setup and scope notes
A scope page in ScopeDive: each cost bucket with its total and its cost per unit, the build-up you can talk through on the phone.

Use your own history

The other strong argument is your record. "We have built eighteen egress stairs like this; our cost per riser has been in this range, and this one is in the middle of it." A cost per unit compared with your own past bids is hard to argue with, because it is not a guess. It is what the work has cost you.

Know which numbers are firm

Before the call, sort your number into what is firm (a supplier quote, a specified finish, a crane the site requires) and what is judgement (your shop hours, your field productivity, your contingency). Defend the firm numbers with the source. Discuss the judgement numbers honestly; that is where a real conversation can happen.

Offer options, not discounts

If the GC is over budget, a straight discount takes margin out of your pocket and leaves the scope unchanged. Options keep the price honest and give the GC something to work with:

  • Value-engineering alternates. A different finish, a simpler connection, a standard size instead of custom. Price each as an alternate deduct so the GC can see what each saves.
  • Scope moves. Concrete fill by others, field touch-up by the painter, unloading by the GC. Each is a real saving if someone else is better placed to do it.
  • Schedule and logistics. Fewer mobilizations, larger deliveries, more access time. Field costs are often driven by the schedule more than by the steel.

Each option should be a priced, numbered line, not a vague promise. When the GC accepts one, issue a new revision of your bid with the change, so the number you send always matches a version you can show.

Prepare before the call comes

The time to prepare your defense is bid day, not the day after. A short checklist that makes the call easy:

  1. List the documents and addenda the price is based on, on the proposal.
  2. Describe each scope so the GC can match it to their bid form.
  3. Keep alternates out of the base, numbered and priced on their own.
  4. Tie qualifications and exclusions to scopes, not just a list at the end.
  5. Review the cost per unit of every scope against your own past bids before sending. If one is unusual, know why.
  6. Keep the version you sent. When the price changes later, you can show exactly what moved between the two.

How ScopeDive helps

ScopeDive is built around this kind of answer. Every scope rolls up through your own cost buckets, shown on one screen with totals and cost per unit, so the build-up is always there. The company brain shows ranges from your own past bids and flags a cost per unit that looks off before the bid ships; it never changes a number. Revisions keep every version you sent, and comparing two shows exactly what moved. The proposal is built from the estimate, with alternates beside the base bid and the qualifications and exclusions you chose. See the estimating engine, revisions and proposals.

The short version: ask what they are comparing, settle the scope before the price, show the build-up by cost category, back it with your own history, and offer priced options instead of a discount.

See it on your work

Price your next bid in ScopeDive.

Book a 20-minute tour and bring a bid you recently priced. We will show you how your library, your rates and your cost structure would look in ScopeDive.